Menu




Climate control

Humidifier Monzón

This humidifier is equipped with an automatic mechanism, which ensures an adequate water level from water inlet connected to the tank or from running water. In addition to its autonomy, this model has uncommonly high power with a consumption capacity of 5.5 liters/hour.

Voltage : 220-240 V
Power : 300 W
Maximum evaporator capacity : 5 kg/h
Air volume : ≥ 120 m3/h
Spray output Diameter : φ110mm
Water particles : ≥ 10 micras
The size of the inlet/outlet tube orifice : 1/2 “
Size : 470 x 240 x 330 mm (sin tubo de pulverización)

Humidifier Monzón : HUMON

Monzón Humidifier Controller

Discover the ultimate solution for precise humidity control with the Neptune Hydroponics Ultrasonic Mist Maker digital humidity controller.Optimize the performance of your crops with advanced humidity control that guarantees ideal conditions for your plants' growth.

  • Highlighted electrical features:
  • Supply voltage: DC (12V~24V) – Compatible with a wide range of power sources.
  • Power consumption: 2W maximum – Energy efficiency that reduces operational costs.
  • Humidity probe: 0-3V output with a 5-meter cable – Flexibility and precision in humidity measurement.
  • Relative humidity range: 20%~95%RH – Ideal for various applications and growing environments.
  • Accuracy: Humidity ±5%RH (at 25°C, 60%RH) – Confidence in accurate readings for precise environmental control.
  • Monzón Humidifier Controller 30W : HUMONCO

    Ultrasonic humidifiers
    1, 5, 12 membranes

    This humidifier generates a dense and persistent fog that can be used both for decorating ponds, fountains, figures etc... And also it increases the ambient humidity in a simple and safe way. There are 3 models available: 1, 5 and 12 membranes.

    • 1, 5, 12 membranes
    • Humidifier
    • Anti splash
    • Float
    • Key + ceramic disc replacement

    Ultrasonic humidifiers : KHUPU

    Ultrasonic humidifiers 5 membranes : KHUPU5

    Ultrasonic humidifiers 12 membranes : KHUPU12

    CO2 Kit with disposable bottle

    The addition of CO2 in the growing room stimulates growth and helps the plants survive the high temperatures. The higher rate of growth and branching results in a greater number of inflorescences. Adequate CO2 level: 1,000 to 1,500 ppm.

    • Carbon dioxide (CO2) is a colorless, odorless, non-flammable gas which always surrounds us. The air we breathe contains 300-400 ppm of CO2.
    • The addition of CO2 in the growing room stimulates growth and helps the plants survive the high temperatures.
    • The enrichment of CO2 causes the foliage, stems and branches to grow in less time. The highest branching rate, facilitates more sites to give rise to inflorescences. The CO2 level should be maintained between 1000 and 1500 ppm.
    • Carbon dioxide can cause people to get dizzy when it exceeds 5,000 ppm, and it can become toxic at higher levels. When CO2 reaches these levels there is always a lack of oxygen.
    • It is important, therefore, to take control of the levels of CO2 when we are releasing the environment, and to know what is the appropriate dose to optimize the growth of plants without putting our health at risk. Never enter a culture room with extra CO2 without - first check the CO2 levels.

    CO2 Kit with disposable bottle : KCO2

    Solenoid valve : CO2VS

    Reducer : CO2RP

    Disposable replacement bottle 1 kg : CO2BD1

    CO2 controller with probe

    The Neptune Hydroponics CO2 controller is autocalibrated and has an optimum operating range of 10 to 50C º/10 to 70% RH. With a maximum adjustable range of 1-10000 ppm. Programmable to define the maximum and minimum. Includes solar cell that disables CO2 during the night.

    CO2 Sensor : Non-dispersive infrared Sensor (NDIR)
    Measuring range : 0 2.000ppm (default)
    Precision : ± 40ppm + 3% reading @ 22 º C (72 º F)
    Stability : 2% full scale for sensor lifetime
    Calibration : Auto-calibration system
    Response time : 5 minutes at 90% of step changes in low driving speed
    Warm-up time : 30 seconds (operation)
    Power : 100 VAC-240VAC
    Consumption : 1.8 W max. : 1.0W avg
    Display LCD: Display to measure CO2
    Dry contact output : 1x Dry Contact output for CO2 switching contact 5A (100VAC-250VAC).
    Highest CO2 setting by default : 820ppm
    Lower CO2 setting by default : 780ppm
    Operating conditions : 0 º C-50 º C 0-99% relative humidity without condensation.
    Storage conditions : 10 -50 º C/10-70% RH.
    Length of cables : Probe : 3,10 m. Power Output : 1,05 m. Power Input : 0,60 m.

    CO2 controller with probe : CO2CON

    Heating blanket





    Name Dimensions Power Length of cables
    Heating blanket 35 x 25 cm 17 W 1.90 m
    Heating blanket 50 x 30 cm 30 W 1.90 m
    Heating blanket 122 x 52,7cm 105 W 1.90 m

    Heating blanket 17W : CANH1

    Heating blanket 30W : CANH2

    Heating blanket 105W : CANH5

    Heating Cable

    Heating Cable with injected plug that transmits heat to the root zone, both in adult plants and in rooting cuttings.

    Name Length Power
    Heating Cable 4 m 30 W
    Heating Cable 10 m 60 W

    Heating Cable 30W : CANH3

    Heating Cable 60W : CANH4

    Water heater

    Properties: NH100W NH300W
    Power 100W/100l 300W/300l
    Temperature 20-34°C 20-34°C
    Length of cables 1.4m 1.4m
    High 29 cm 33 cm

    Water heater 100W: NH100

    Water heater 300W: NH300

    Humidifier Monzón

    This humidifier is equipped with an automatic mechanism, which ensures an adequate water level from water inlet connected to the tank or from running water. In addition to its autonomy, this model has uncommonly high power with a consumption capacity of 5.5 liters/hour.

    Voltage : 220-240 V
    Power : 300 W
    Maximum evaporator capacity : 5 kg/h
    Air volume : ≥ 120 m3/h
    Spray output Diameter : φ110mm
    Water particles : ≥ 10 micras
    The size of the inlet/outlet tube orifice : 1/2 “
    Size : 470 x 240 x 330 mm (sin tubo de pulverización)

    Humidifier Monzón : HUMON




    Monzón Humidifier Controller

    Discover the ultimate solution for precise humidity control with the Neptune Hydroponics Ultrasonic Mist Maker digital humidity controller. Optimize the performance of your crops with advanced humidity control that guarantees ideal conditions for your plants' growth.

    • Highlighted electrical features:
    • Supply voltage: DC (12V~24V) – Compatible with a wide range of power sources.
    • Power consumption: 2W maximum – Energy efficiency that reduces operational costs.
    • Humidity probe: 0-3V output with a 5-meter cable – Flexibility and precision in humidity measurement.
    • Relative humidity range: 20%~95%RH – Ideal for various applications and growing environments.
    • Accuracy: Humidity ±5%RH (at 25°C, 60%RH) – Confidence in accurate readings for precise environmental control.

    Monzón Humidifier Controller 30W : HUMONCO




    Ultrasonic humidifiers
    1, 5, 12 membranes

    This humidifier generates a dense and persistent fog that can be used both for decorating ponds, fountains, figures etc... And also it increases the ambient humidity in a simple and safe way. There are 3 models available: 1, 5 and 12 membranes.

    • 1, 5, 12 membranes
    • Humidifier
    • Anti splash
    • Float
    • Key + ceramic disc replacement

    Ultrasonic humidifiers : KHUPU

    Ultrasonic humidifiers 5 membranas : KHUPU5

    Ultrasonic humidifiers 12 membranas : KHUPU12




    CO2 Kit with disposable bottle

    The addition of CO2 in the growing room stimulates growth and helps the plants survive the high temperatures. The higher rate of growth and branching results in a greater number of inflorescences. Adequate CO2 level: 1,000 to 1,500 ppm.

    • Carbon dioxide (CO2) is a colorless, odorless, non-flammable gas which always surrounds us. The air we breathe contains 300-400 ppm of CO2.
    • The addition of CO2 in the growing room stimulates growth and helps the plants survive the high temperatures.
    • The enrichment of CO2 causes the foliage, stems and branches to grow in less time. The highest branching rate, facilitates more sites to give rise to inflorescences. The CO2 level should be maintained between 1000 and 1500 ppm.
    • Carbon dioxide can cause people to get dizzy when it exceeds 5,000 ppm, and it can become toxic at higher levels. When CO2 reaches these levels there is always a lack of oxygen.
    • It is important, therefore, to take control of the levels of CO2 when we are releasing the environment, and to know what is the appropriate dose to optimize the growth of plants without putting our health at risk. Never enter a culture room with extra CO2 without - first check the CO2 levels.

    CO2 Kit with disposable bottle : KCO2

    Solenoid valve : CO2VS

    Reducer : CO2RP

    Disposable replacement bottle 1 kg : CO2BD1




    CO2 controller with probe

    The Neptune Hydroponics CO2 controller is autocalibrated and has an optimum operating range of 10 to 50C º/10 to 70% RH. With a maximum adjustable range of 1-10000 ppm. Programmable to define the maximum and minimum. Includes solar cell that disables CO2 during the night.

    CO2 Sensor : Non-dispersive infrared Sensor (NDIR)
    Measuring range : 0 2.000ppm (default)
    Precision : ± 40ppm + 3% reading @ 22 º C (72 º F)
    Stability : 2% full scale for sensor lifetime
    Calibration : Auto-calibration system
    Response time : 5 minutes at 90% of step changes in low driving speed
    Warm-up time : 30 seconds (operation)
    Power : 100 VAC-240VAC
    Consumption : 1.8 W max. : 1.0W avg
    Display LCD: Display to measure CO2
    Dry contact output : 1x Dry Contact output for CO2 switching contact 5A (100VAC-250VAC).
    Highest CO2 setting by default : 820ppm
    Lower CO2 setting by default : 780ppm
    Operating conditions : 0 º C-50 º C 0-99% relative humidity without condensation.
    Storage conditions : 10 -50 º C/10-70% RH.
    Length : Probe : 3,10 m. Power Output : 1,05 m. Power Input : 0,60 m.

    CO2 controller with probe : CO2CON

    Heating blanket

    Name Dimensions Power Length of cables
    Heating blanket 35 x 25 cm 17 W 1.90 m
    Heating blanket 50 x 30 cm 30 W 1.90 m

    Heating blanket 17W : CANH1

    Heating blanket 30W : CANH2

    Heating Cable

    Name Length Power
    Heating Cable 4 m 30 W
    Heating Cable 10 m 60 W

    Heating Cable 30W : CANH3

    Heating Cable 60W : CANH4

    Water heater

    Properties: NH100W NH300W
    Power 100W/100l 300W/300l
    Temperature 20-34°C 20-34°C
    Length of cables 1.4m 1.4m
    High 29 cm 33 cm

    Water heater 100W: NH100

    Water heater 300W: NH300